Keg & Cask Washers

K-series Dual Purpose Machine

As well as casks, the K-Series washes kegs without the need to remove the spears – it is believed to be the only machine on the market to effectively wash both casks and kegs.

  • Raise the bed
  • Connect the flexi-hoses to the kegs and place them on the bed.
  • Select Keg Washing function on the control panel
  • Press Start
  • From this point onwards the cleaning process is automatic.
  • An initial air purge will remove any remaining dregs from the keg
  • The automated cycle works until the ‘Cycle Complete’ light turns green.
  • The kegs are then dismounted and the flexible hoses detached.
  • The cleaning process is now ready to start again.
  • The cycle time is approximately 5 minutes.

Benefits

  • Saves time – The automated cask washing process can clean up to 48 casks or kegs per hour.
  • Saves effort – Units are cleaned automatically without need of any additional lifting.
  • Saves water – Recycled water from the cask cleaning process is cleverly reused minimising usage costs and the environmental impact.
  • Reduces problems – Reduces the expensive issue of contaminated units potentially spoiling batches of ale.
  • Reduces ‘bottlenecks’ – quickly restores supply of clean units into circulation.

200K SERIES

200K Series Keg and Cask Washer
  • Casks per hour: 26
  • Heating: Electric 9kW (200KE) | Steam (200KS)
  • Power requirement: 16A 3 phase (200KE) | 16A 3 phase or 13A Single (200KS)
  • Air requirement: 5-10 bar 14.5CFM
  • Water requirement: 80 Litres / Min
  • Water consumption: 15 Litres per cask/keg
  • Tank capacity: 45 Litres
  • Steam requirements: Max. 80°C 1-3 bar @ 30-40 kg/hr (200KS)
  • Dimensions (LxWxH): 1350mm x 770mm (+500mm when keg bed raised) x 1695mm

(200KE = Electric heated. 200KS = Steam heated.)


300K SERIES

300K Series Keg and Cask Washer
  • Casks per hour: 39
  • Heating: Electric 12kW (300KE) | Steam (300KS)
  • Power requirement: 32A 3 phase (300KE) | 16A 3 phase or 13A Single (300KS)
  • Air requirement: 5-10 bar 14.5CFM
  • Water requirement: 120 Litres / Min
  • Water consumption: 15 Litres per cask/keg
  • Tank capacity: 65 Litres
  • Steam requirements: Max. 80°C 1-3 bar @ 30-40 kg/hr (300KS)
  • Dimensions (LxWxH): 2170mm x 770mm (+500mm when keg bed raised) x 1695mm

(300KE = Electric heated. 300KS = Steam heated.)


400K SERIES

400K Series Keg and Cask Washer
  • Casks per hour: 52
  • Heating: Electric 12kW (400KE) | Steam (400KS)
  • Power requirement: 32A 3 phase (400KE) | 16A 3 phase or 13A Single (400KS)
  • Air requirement: 5-10 bar 14.5CFM
  • Water requirement: 160 Litres / Min
  • Water consumption: 15 Litres per cask/keg
  • Tank capacity: 95 Litres
  • Steam requirements: Max. 80°C 1-3 bar @ 30-40 kg/hr (300KS)
  • Dimensions (LxWxH): 2410mm x 865mm (+500mm when keg bed raised) x 1705mm

(400KE = Electric heated. 400KS = Steam heated.)


SIBA
Proud to support British Beer
Close Brothers Equipment finance
Looking for Equipment Finance?
Designed and built in the UK
Designed and built in the UK